publicações selecionadas
-
artigo de revista
- Optimizing parameters to improve PDMS surface wettability and the thermal conductivity analysis. Journal of Molecular Liquids. 2025
- Physicochemical Characterisation of Olive Mill Wastewaters Based on Extraction Methods and Filtration Levels. Clean Technologies. 2025
- Progress in Nanofluid Technology: From Conventional to Green Nanofluids for Biomedical, Heat Transfer, and Machining Applications. Nanomaterials. 2025
- Thermal performance evaluation of pure PDMS and PDMS composites heat exchangers. Journal of Thermal Analysis and Calorimetry. 2025
- Sustainable green synthesis of metallic nanoparticle using plants and microorganisms: A review of biosynthesis methods, mechanisms, toxicity, and applications. JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING. 2025
- Green synthesis of copper ferrite-based nanofluids using Chlorella vulgaris for heat transfer enhancement. Journal of Molecular Liquids. 2025
- Computational simulation of the hemodynamics in an anatomic carotid artery model: A biphasic blood model. Journal of Engineering and Science in Medical Diagnostics and Therapy. 2024
- Mechanical and optical properties assessment of an innovative PDMS/beeswax composite for a wide range of applications. Journal of the Mechanical Behavior of Biomedical Materials. 2024
- Recent Advances of PDMS In Vitro Biomodels for Flow Visualizations and Measurements: From Macro to Nanoscale Applications. Micromachines. 2024
- Experimental evaluation of green nanofluids in heat exchanger made oF PDMS. THERMAL SCIENCE AND ENGINEERING PROGRESS. 2024
- Green Synthesis of Nanoparticles from Olive Oil Waste for Environmental and Health Applications: A Review. JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING. 2024
- Advances in Microfluidic Systems and Numerical Modeling in Biomedical Applications: A Review. Micromachines. 2024
- A Review of Methods to Modify the PDMS Surface Wettability and Their Applications. Micromachines. 2024
- Polydimethylsiloxane Surface Modification of Microfluidic Devices for Blood Plasma Separation. Polymers. 2024
- A Review of Novel Heat Transfer Materials and Fluids for Aerospace Applications. Aerospace. 2024
- Stress Concentration on PDMS: An evaluation of three numerical constitutive models using digital image correlation. Journal of the Mechanical Behavior of Biomedical Materials. 2023
- Conventional and Recent Advances of Vegetable Oils as Metalworking Fluids (MWFs): A Review. Lubricants. 2023
- Mechanical Properties of PLA Specimens Obtained by Additive Manufacturing Process Reinforced with Flax Fibers. Journal of Composites Science. 2023
- Diagnosis Methods for COVID-19: A Systematic Review. Micromachines. 2022
- Analysis of a Vegetable Oil Performance in a Milling Process by MQL Lubrication. Micromachines. 2022
- Label-free multi-step microfluidic device for mechanical characterization of blood cells: Diabetes type II. Micro and Nano Engineering. 2022
- Geometry effect in multi-step crossflow microfluidic devices for red blood cells separation and deformability assessment. Biomedical Microdevices. 2022
- Fluid Flow and Structural Numerical Analysis of a Cerebral Aneurysm Model. Fluids. 2022
- Low-Cost Multifunctional Vacuum Chamber for Manufacturing PDMS Based Composites. MACHINES. 2022
- Recent Developments on the Thermal Properties, Stability and Applications of Nanofluids in Machining, Solar Energy and Biomedicine. Applied Sciences. 2022
- Properties and Applications of PDMS for Biomedical Engineering: A Review. Journal of Functional Biomaterials. 2021
- Polydimethylsiloxane mechanical properties: A systematic review. AIMS MATERIALS SCIENCE. 2021
- Polydimethylsiloxane Composites Characterization and Its Applications: A Review. Polymers. 2021
- Composite Material of PDMS with Interchangeable Transmittance: Study of Optical, Mechanical Properties and Wettability. Journal of Composites Science. 2021
- Manual and Automatic Image Analysis Segmentation Methods for Blood Flow Studies in Microchannels. Micromachines. 2021
- Blood Flow Modeling in Coronary Arteries: A Review. Fluids. 2021
- Visualization and Measurements of Blood Cells Flowing in Microfluidic Systems and Blood Rheology: A Personalized Medicine Perspective. Journal of Personalized Medicine. 2020
- A Microfluidic Deformability Assessment of Pathological Red Blood Cells Flowing in a Hyperbolic Converging Microchannel. Micromachines. 2019
- Blood Cells Separation and Sorting Techniques of Passive Microfluidic Devices: From Fabrication to Applications. Micromachines. 2019
- In vitro blood flow visualizations and cell-free layer (CFL) measurements in a microchannel network. Experimental Thermal and Fluid Science. 2019
- Red blood cells (RBCs) visualisation in bifurcations and bends 2018
- Polymer microfluidic devices: an overview of fabrication methods. U.Porto Journal of Engineering. 2017
- In vitro particulate analogue fluids for experimental studies of rheological and hemorheological behavior of glucose-rich RBC suspensions. Biomicrofluidics. 2017
- Wall expansion assessment of an intracranial aneurysm model by a 3D Digital Image Correlation System. Measurement. 2016
- Degradation of diphenhydramine by photo-Fenton using magnetically recoverable iron oxide nanoparticles as catalyst. Chemical Engineering Journal. 2015
- Human red blood cell behavior under homogeneous extensional flow in a hyperbolic-shaped microchannel. Biomicrofluidics. 2013
- Red blood cell motions in high-hematocrit blood flowing through a stenosed microchannel. Journal of Biomechanics. 2009
- O tratamento dos resíduos sólidos urbanos no Japão: caso particular da incineradora de Toshima. Indústria e Ambiente. 2005
-
artigo de conferência
- 3D Hollow microneedles fabrication for microfluidic applications 2024
- EXPERIMENTAL INVESTIGATION OF GREEN NANOFLUIDS: ASSESSMENT OF WETTABILITY, VISCOSITY AND THERMAL CONDUCTIVITY 2024
- Thermal and Fluid Flow Behavior Within an Organ-on-a-Chip Model: A Numerical Study 2024
- Analysis of a Simple Method to Change the Wettability of the PDMS Surface for Biomicrofluidic Applications 2023
- Blood Flow in Macro and Microfluidic Systems: From Fabrication to Applications 2021
- Magnetic carbon nanostructures and study of their transport in microfluidic devices for hyperthermia 2020
- Multifunctional graphene-based magnetic nanocarriers optimized with copolymer Pluronic F127 for biomedical applications 2017
- Development of stimuli-responsive graphene-based yolk-shell magnetic nanoparticles for controlled release of anticancer drugs 2016
- Low cost microfluidic device for partial cell separation: Micromilling approach 2015
- Biomechanical analysis of PDMS channels using different hyperelastic constitutive models 2015
- Development of a methodology using GC-FID for the quantitativo analysis of fatty acids from red blood cells 2014
- Motion of rigid particles flowing in a micofluidic device with a pronounced stenosis: Trajectories and deformation index (Oral presentation) 2014
- Automatic tracking of red blood cells in micro channels using OpenCV 2013
- Measurement of Red Blood Cells Deformation Índex in a Hyperbolic Microchannel 2013
- Desenvolvimento de um microdispositivo biomédico para a separação de células sanguíneas 2013
- Flow of Red Blood Cells in Microchannel Networks: in vitro studies 2013
- An automatic method to track red blood cells in microchannels 2012
- Numerical prediction of velocity, pressure and shear rate distributions in stenosed channels 2011
- Tracking erythrocytes in a 100 in glass capillary. Japan-Portugal Nano-Biomedical Engineering Symposium. 2011
- Blood-on-chips: flow through complex geometries 2010
- Flow of physiological fluids in microchannels: the sedimentation effect. IFMBE Proceedings. 2010
- Rapid prototyping of 3D anatomical models to hemodynamic studies 2010
- Motion of individual red blood cells in a concentrated suspension flowing through micro-channels 2009
- Determination of blood cells motions and interactions by a confocal micro-PIV system 2008
- Dispersion of red blood cells in microchannels : a confocal micro-PTV assessment 2008
- Motion of red blood cells and cell free layer distribution in a stenosed microchannel 2008
- The role of the hematocrit on the radial dispersion of red blood cells in glass capillaries 2008
- Observation of blood flow in microchannel with stenosis by confocal micro-PIV 2007
- Velocity fields of blood flow in microchannels using a confocal micro-PIV system 2007
- O Tratamento dos Resíduos Sólidos Urbanos em Tóquio: A Incineradora de Toshima 2003
-
livro
- 2nd. International Workshop on Additive Manufacturing and Sustainability (IWAM): book of proceedings 2025
- Seminar on Computational Fluid Dynamics Applications in Biomedical Engineering: Book of Abstracts 2024
- 1st International Congress on Additive Manufacturing 2022
- 1st International Congress on Additive Manufacturing: book of abstract 2022
- Thermal infrared image processing to assess heat generated by magnetic nanoparticles for hyperthermia applications 2015
- Flow of Red Blood Cells Suspensions Through Hyperbolic Microcontractions 2014
-
capítulo de livro
- Flow Visualizations in a PDMS Cerebral Aneurysm Biomodel 2023
- Manufacturing Process of a Brain Aneurysm Biomodel in PDMS Using Rapid Prototyping 2019
- Red Blood Cells Separation in a Curved T-Shaped Microchannel Fabricated by a Micromilling Technique 2019
- An In Vitro Experimental Evaluation of the Displacement Field in an Intracranial Aneurysm Model 2015
- Cell-free Layer Measurements in a Network with Bifurcating Microchannels using a Global Approach 2015
- Micro-flow visualization of magnetic nanoparticles for biomedical applications 2012
-
poster de conferência
-
documento
- A Brief Discussion on PDMS Surface Wettability Enhancement Methods for Microfluidic Applications 2025
- Valorisation of Olive Mill Wastewaters for Industrial Applications 2025
- A simple method to modify the wettability of the PDMS surface for biomedical applications 2022
- A Simple Method to Modify the PDMS Surface Wettability for Biomicrofluidic Applications 2022
- A hybrid fabrication method able to perform separation of cells from plasma 2014
- Automatic cell tracking method based on optical flow tuned by template matching 2014
- Visualization and measurement of Red Blood Cells flowing inmicrofluidic devices (Oral presentation) 2014
- Técnicas de separação biomiméticas e microfluidica 2013
- Visualization of the cell-free layer (CFL) in a PDMS microchannel with a micro-stenosis 2013