abstract
- Lightweight steel framing (LSF) walls are commonly used in modern buildings due to their high strength-to -weight ratio and readiness for installation. However, empty cavities within these walls can pose a fire risk if not properly addressed. In order to ensure the fire resistance and performance of LSF walls with empty cavities, various modelling techniques can be employed. Two-dimensional thermal models can also be used to simulate the behaviour of LSF walls with empty cavities in a fire scenario. These models can predict the spread of heat through the empty cavity, allowing designers to identify potential fire hazards and make adjustments to the design to mitigate those risks.Three different computational solution methods were used to compare the fire performance of LSF walls with void cavities. Solution method 1 considers the air-structure interaction in the cavity region. Solution method 2 considers the existence of interface elements for the radiation heat transfer in the cavity region allowing the cavity temperature prediction. Solution method 3 considers the convection and radiation in the cavity region with a prescribed cavity temperature from experiments (hybrid). Solution methods 1 and 3 give a small root mean square error (RMSE), when compared with solution method 2. Solution method 3 gives a better approx-imation because can capture the main fire events during the fire, such as the cracks and fall off. Based on the parametric study, a new proposal is presented to predict the fire resistance by insulation, depending on the gypsum type and thickness.